Omron FQ2-S Series User Manual page 282

DIOFFSET or DIO
Acquire Terminal Offset Data
This command acquires the terminal offset data that is added to the IN0 to IN4 command parameters when
executing parallel commands.
If no value has been set with the Set Terminal Offset command, "0" is returned as the terminal offset value and
"OK" (ended normally) is returned for the end code.
Set Terminal Offset Data: p.306
<Command Format>
Command
D I O F
or
D I O CR
Command Delimiter
<Response Format>
When the Command Is Processed Normally
Acquired
CR
value
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Acquired value
280
Command Control
F S E T CR
Delimiter
Returns the value added to the IN0 to IN4 command parameters when executing parallel
commands.
FQ2-S/CH User's Manual
for Communications Settings