Omron FQ2-S Series User Manual page 269

<Response Format>
When the Command Is Processed Normally
O K CR
Measure-
CR
ment result
Measure-
Data returned for the number of
CR
ment result
continuous measurements made.
Measure-
CR
ment result
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Measurement result
End Continuous Measurements
The command ends continuous measurements.
<Command Format>
M E A S U R
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
O K CR
Measurement Data returned
CR
result
for the number
of continuous
measurements
Measurement
CR
made.
result
Delimiter
FQ2-S/CH User's Manual
for Communications Settings
The measurement results corresponding to the number of measurements made are out-
put when data output is set.
The measurement result is not output when data output is not set.
Setting the Data to Output Automatically after Measurements: p. 169
E / E CR
Space (0x20) Delimiter
or
M / E
Space (0x20) Delimiter
CR
267
Command Control