Omron FQ2-S Series User Manual page 324

OUTPUTTRANSSTATE or OTS
Set Communication Output Status
This command sets the output status (allowed/prohibited) for all the communications protocol.
Communications protocols with the output status set to prohibited will no longer output signals after being set
as such.
<Command Format>
O U T P
Communications protocol status to be set
or
(1 digit max.)
O T S
Command
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Communications protocol
status to be set
322
Command Control
Command
U T T R A N
CR
Delimiter
Space
(0x20)
Specifies the communications protocol status to be acquired.
0: Output prohibited status
1: Output allowed status
Communications protocol status
to be set (1 digit max.)
S S T A T E CR
Space Delimiter
(0x20)
FQ2-S/CH User's Manual
for Communications Settings