Omron FQ2-S Series User Manual page 114

● Commands to Write Data
Command code in
command area (hex)
+2 +3
1010 0050
1020 0050
1040 0050
4010 0050
4060 0050
7010 0030
7020 0030
8010 0030
8020 0030
8030 0030
F000 0020
● Load Setting Data Commands
Command code in
command area (hex)
+2 +3
1000 0060
2000 0060
3000 0060
5000 0060
A000 0060
112
Controlling Operation and Outputting Data with EtherNet/IP Communications
Command name
Set Image Adjustment Item
Data
Set Inspection Item Data
Set Camera Parameter
Set System Data
Set Terminal Offset Data
Set Communication Input Sta-
tus
Set Communication Output
Status
Set Terminal Status
Batch Set Terminal Status
Batch Set D Terminal Status
Set Execution Mode
Command name
Load Scene Data
Load All Scene Data
Load System Data
Load All Setting Data
Load Calibration Data
Function
Sets parameters for a position compensation
item or filter item.
Sets parameters for the specified inspection
item.
Sets the value for the specified camera
parameter.
Sets the value to the specified system data.
Sets the value of the terminal offset data that
is added to the IN0 to IN4 command parame-
ters
Sets the input status (allowed/prohibited) of
the communications port for the specified
communications protocol.
Sets the output status (allowed/prohibited) of
the communications port for the specified
communications protocol.
Sets the output signal ON/OFF status for the
specified parallel I/O terminal.
Batch sets the ON/OFF status for the all par-
allel I/O output terminals other than the D ter-
minals (D0 to D15).
Batch sets the ON/OFF status for the D termi-
nals (D0 to D15).
Sets the FQ2 execution status (execution
mode).
Function
Loads scene data that is stored on the SD
card inserted in the Touch Finder.
Loads all scene data that is stored on the SD
card inserted in the Touch Finder.
Loads system data that is stored on the SD
card inserted in the Touch Finder.
Loads all setting data (all scene data, system
data, calibration group data) for the Sensor
saved as a backup file from the SD card
inserted in the Touch Finder.
Loads calibration data that is stored on the
SD card inserted in the Touch Finder as the
specified calibration number.
Reference
p.233
p.233
p.234
p.235
p.235
p.236
p.237
p.238
p.239
p.240
p.241
Reference
p.242
p.243
p.244
p.245
p.246
FQ2-S/CH User's Manual
for Communications Settings