Omron FQ2-S Series User Manual page 260

Save Model Dictionary Data
Saves the specified number of model dictionary data as a file to the SD card inserted in the Touch Finder.
The destination for scene data is the following fixed directory on the SD card.
\Sensor name\DIC
The file name is not case sensitive. The file name extension can be omitted.
Command (PLC to Vision Sensor)
First word of
command
12 to 15
area
+2
+3
+4
+5
+6
+7
+8
:
+37
*1 Saved as a file named Dictionary_***.dic. (***: Specified file number)
Response (Vision Sensor to PLC)
First word of
response area
+2
+3
+4
+5
258
Command Control
Bits
8 to 11
1100 0000
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
: :
0000 0000
Bits
12 to 15 8 to 11
1100 0000
0000 0000
0000 0000
0000 0000
4 to 7 0 to 3
0000 0000
0111 0000
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
: :
0000 0000
4 to 7 0 to 3
0000 0000
0111 0000
0000 0000
0000 0000
Description
Command code
Model dictionary data number to
save
• EtherNet/IP, • PLC link
PROFINET File name to
File number to load
*1
save (0 to 999) 64 characters
max.
---
The file name
extension (.dic)
can be omitted.
Description
Command code
The command code for which the
response applies is stored.
Response code
Command execution result
0: OK, FFFFFFFF: NG
FQ2-S/CH User's Manual
for Communications Settings