Omron FQ2-S Series User Manual page 419

● Load All Calibration Data: 280F 0060B000
This command loads all calibration data that is stored on the SD card inserted in the Touch Finder.
The source for all calibration data is the following fixed directory on the SD card.
\Sensor name\CGP
Format
MRC SRC Vision Sensor command code
(1 byte) (1 byte) (4 bytes)
28 0F 0060B000
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex) Description
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
All calibration data name Specifies the all calibration data file name to be loaded.
The file name extension (.cgp) can be omitted.
Important
Do not turn off power to the Vision Sensor until there is a response.
FQ2-S/CH User's Manual
for Communications Settings
All scene data file name
(4 to 64 bytes)
64 characters max.
SRES Vision Sensor command code
(1 byte) (4 bytes)
0060B000
417
Command Control