Omron FQ2-S Series User Manual page 356

PRECLBLOADB (Check) / CLBLOADB (Execute)
Loading calibration data (binary data)
The Sensor loads calibration data in binary format as the specified calibration number.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 183.
<Confirmation command format>
Before loading calibration data in binary data format, the Sensor checks whether or not it can receive binary
data.
P R E C
<Confirmation command response format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Execution command format>
Loads calibration data in binary data format.
C L B L
<Execution command response format>
When the Command Is Processed Normally
O K CR
Delimiter
354
Command Control
L B L O A D
Calibration number
O A D B
Space
(0x20)
File size scheduled to be sent
B
Space Delimiter
(0x20)
Space Calibration data
(0x20) (binary)
CR
Delimiter
CR
FQ2-S/CH User's Manual
for Communications Settings