Omron FQ2-S Series User Manual page 415

● Load All Scene Data: 280F 00602000
Loads all scene data that is stored on the SD card inserted in the Touch Finder.
The source for all scene data is the following fixed directory on the SD card.
\Sensor name\SGP
Format
MRC SRC Vision Sensor command code
(1 byte) (1 byte) (4 bytes)
28 0F 00602000
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex) Meaning
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
Scene group data file Specifies the all scene data file name to be loaded.
name The file name extension (.sgp) can be omitted.
(all scene data file name) Specifies the scene group number (0 to 31) to be loaded.
Important
Do not turn off power to the Vision Sensor until there is a response.
FQ2-S/CH User's Manual
for Communications Settings
Scene group number (4 bytes)
2 digits max.
SRES Vision Sensor command code
(1 byte) (4 bytes)
00602000
Scene group data file
name (4 to 64 bytes)
64 characters max.
Command Control
413