Omron FQ2-S Series User Manual page 16

Connection Compatibility
Type of connection to
FQ2-S/CH
EtherNet/IP
PLC Link on Ethernet
PROFINET
TCP no-protocol communi-
cations on Ethernet,
UDP no-protocol communi-
cations on Ethernet
FINS/TCP no-protocol com-
munications on Ethernet
*1
RS-232C
Parallel Sensor's stan-
communi- dard parallel
cations communica-
tions
Parallel Inter-
*2
face
*1: This applies when an RS-232C Interface Sensor Data Unit is connected.
*2: This applies when a Parallel Interface Sensor Data Unit is connected.
Note
Connections Across Network Routers
You can connect to a Sensor on a different network than the Touch Finder or PC Tool through a router.
• To connect to a Sensor, directly specify the IP address of the Sensor. Automatic connection to a Sensor is not
possible.
• Use a fixed IP address for the Sensor to connect to.
14
Communicating with an External Device
Other connection
EtherNet/IP PLC Link PROFINET TCP no-protocol
on Ethernet
--- No No
No --- No
No No ---
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes: Supported, No: Not supported
FINS/TCP RS-232C
communications on no-proto-
Ethernet, col commu-
UDP no-protocol nications
communications on Ethernet
on Ethernet
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
--- No No
No --- No
No No ---
Yes Yes Yes
Yes Yes No
*1
Parallel communications
Sensor's Parallel
*2
standard Interface
parallel com-
munications
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
--- No
No ---
FQ2-S/CH User's Manual
for Communications Settings