Omron FQ2-S Series User Manual page 393

● Change Scene Number: 280F 00301000
This command changes the scene number to use.
Format
MRC SRC Vision Sensor command code
(1 byte) (1 byte) (4 bytes)
28 0F 00301000
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex) Meaning
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
Scene number Specifies the scene number (0 to 31) to change to.
FQ2-S/CH User's Manual
for Communications Settings
Scene number (4 bytes)
Scene number to change to
(2 digits max.)
SRES Vision Sensor command code
(1 byte) (4 bytes)
00301000
391
Command Control