Omron FQ2-S Series User Manual page 427

● Save All Setting Data: 280F 00705000
This command saves all setting data (all scene data, system data, calibration group data) for the Sensor to the
SD card inserted in the Touch Finder as a backup file.
The destination for backup data is the following fixed directory on the SD card.
\Sensor name\BKD
Format
MRC SRC Vision Sensor command code
(1 byte) (1 byte) (4 bytes)
28 0F 00705000
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex) Meaning
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
All setting data file name This command specifies the all setting data backup file name.
The file name extension (.bkd) can be omitted.
Important
Do not turn off power to the Vision Sensor until there is a response.
FQ2-S/CH User's Manual
for Communications Settings
All setting data file name
(4 to 64 byte)
64 characters max.
SRES Vision Sensor command code
(1 byte) (4 bytes)
00705000
425
Command Control