Omron FQ2-S Series User Manual page 268

I T E M
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Inspection item number
MEASURE or M
Start Continuous Measurements
This command starts continuous measurements.
If data output is not set, only continuous measurement is performed.
If data output is set, continuous measurement is performed and the results corresponding to the number of
measurements made are returned as response data.
<Command Format>
M E A S
266
Command Control
T E A C H
Space
(0x20)
Specifies the item number of the inspection item that teaching will be performed on. (0 to
31)
Only "0" can be specified with the FQ2-S1 series.
U R E / C
Space (0x20) Delimiter
Delimiter
or
CR I
Inspection item number
(2 digits max.)
or
CR M
Space (0x20)
Delimiter
T CR
Space Inspection item number
(0x20) (2 digits max.)
/ C CR
Delimiter
FQ2-S/CH User's Manual
for Communications Settings