Omron FQ2-S Series User Manual page 358

<Execution command format>
Loads all calibration data in binary data format.
C G R L
<Execution command response format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
File size scheduled to be sent
All calibration data (binary)
PREDICLOADB (Check) / DICLOADB (Execute)
Loading model dictionary data (binary data)
The Sensor loads model dictionary data in binary data format as the model dictionary with the specified
number.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 183.
<Confirmation command format>
Before loading model dictionary data in binary data format, the Sensor checks whether or not it can receive
binary data.
P R E D
356
Command Control
All calibration data (binary)
O A D B
Space
(0x20)
Number of bytes of all calibration data scheduled to send (integer type)
All calibration data to be loaded (binary data)
I C L O A D
CR
Delimiter
File size scheduled to be sent
B
Space Delimiter
(0x20)
CR
FQ2-S/CH User's Manual
for Communications Settings