CLBSAVE
This command saves the calibration data with the specified calibration number as a file to the SD card inserted
in the Touch Finder.
The destination for calibration data is the following fixed directory on the SD card.
\Sensor name\CLB
<Command Format>
C L B S A V E
Space (0x20)
<Response Format>
When the Command Is Processed Normally
O
K
CR
Delimiter
When the Command Is Not Processed Normally
E
R
CR
Delimiter
<Parameter Descriptions>
Scene number
Specifies the scene number (0 to 31) to be saved.
Calibration data file
Specifies the file name when saving.
name
The file name extension (.clb) can be omitted.
Important
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Vision Sensor until there is a response.
CGRSAVE
Saves all calibration data as a file to the SD card inserted in the Touch Finder.
The destination for all calibration data is the following fixed directory on the SD card.
\Sensor name\CGP
<Command Format>
C G R S A V E
FQ2-S/CH User's Manual
for Communications Settings
C
R
Calibration data file name
Space (0x20)
Scene number (2 digits max.)
C
R
All calibration data file name
Space (0x20)
343
Command Control