Omron FQ2-S Series User Manual page 195

Type of command Command codes (hex)
MRC+SRC com-
mand code
Commands to set status 280F
280F
280F
280F
280F
280F
280F
280F
280F
280F
280F
Load setting data com- 280F
mands
280F
280F
280F
280F
280F
280F
280F
Save setting data com- 280F
mands
280F
280F
280F
FQ2-S/CH User's Manual
for Communications Settings
Vision Sensor com-
mand code
00307010
00307020
00308010
00308020
00308030
0030F000
00501010
00501020
00501040
00504010
00504060
00601000
00602000
00603000
00605000
0060A000
0060B000
0060C000
0060D000
00701000
00702000
00703000
00704000
Controlling Operation and Outputting Data with FINS/TCP No-protocol Commands
Function
Sets the input status (allowed/prohibited) of the
communications port for the specified commu-
nications protocol.
Sets the output status (allowed/prohibited) for
the specified communications protocol.
Sets the output signal ON/OFF status for the
specified parallel I/O terminal.
Batch sets the ON/OFF status for the all parallel
I/O output terminals other than the D terminals
(D0 to D15).
Batch sets the ON/OFF status for the D termi-
nals (D0 to D15).
Sets the FQ2 execution status (execution
mode).
Sets parameters for a position compensation
item or filter item.
Sets parameters for the specified inspection
item.
Sets the value for the specified camera param-
eter.
Sets the value to the specified system data.
Sets the value of the terminal offset data that is
added to the IN0 to IN4 command parameters
Loads scene data that is stored on the SD card
inserted in the Touch Finder.
Loads all scene data that is stored on the SD
card inserted in the Touch Finder.
Loads system data that is stored on the SD
card inserted in the Touch Finder.
Loads all setting data (all scene data, system
data, calibration group data) for the Sensor
saved as a backup file from the SD card
inserted in the Touch Finder.
Loads calibration data that is stored on the SD
card inserted in the Touch Finder as the calibra-
tion data with the specified number.
Loads all calibration data that is stored on the
SD card inserted in the Touch Finder.
Loads model dictionary data that is stored on
the SD card inserted in the Touch Finder as the
model dictionary with the specified number.
Loads all model dictionary data that is stored on
the SD card inserted in the Touch Finder.
Saves scene data to the SD card inserted in the
Touch Finder as a file.
Saves all scene data as a file to the SD card
inserted in the Touch Finder.
Saves system data as a file to the SD card
inserted in the Touch Finder.
Saves image data saved in the Sensor's mem-
ory by the logging function to the SD card
inserted in the Touch Finder as ifz data.
Reference
p.392
p.393
p.394
p.396
p.397
p.398
p.407
p.408
p.409
p.410
p.411
p.412
p.413
p.414
p.415
p.416
p.417
p.418
p.419
p.420
p.421
p.422
p.423
193