Omron FQ2-S Series User Manual page 288

GETPOSFIGPARAM or GPFP
Acquire Measurement Region/Model Region Information Set for an Image Adjustment Item (Filter Item/Position
Compensation Item)
This command acquires the parameters for the measurement region or the model registration region set for an
image adjustment item (filter item/position compensation item).
Note
To check the figure number to be used when specifying a figure to change the settings of with the Set Image Adjust-
ment Item Figure command, do so using this command.
<Command Format>
G E T P O
or
Space
(0x20)
G P F P
Command
<Response Format>
When the Command Is Processed Normally
Parameter 1 ,
Comma (fixed separator character)
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
286
Command Control
Command
S F I G P A
Space
Figure number
(0x20)
(1 digit)
CR
Space
(0x20)
Region number (1 digit)
Image adjustment item (filter item/position compensation item) number (1 digit)
Parameter 2 , ... Parameter 21
Comma (fixed separator character)
Image adjustment item
(filter item/position compensation item) number (1 digit)
R A M
Space Region
(0x20) number
(1 digit)
Space
(0x20)
Delimiter
CR
Space
Delimiter
(0x20)
CR
Figure
number
(1 digit)
FQ2-S/CH User's Manual
for Communications Settings