SYSLOAD
This command loads system data that is stored on the SD card inserted in the Touch Finder.
The source for system data is the following fixed directory on the SD card.
\Sensor name\SYD
<Command format>
C
S Y S L O A D
R
Space (0x20)
File name of system data
<Response format>
When Processing Is Performed Normally
When Processing Is Not Performed Normally
<Parameter Descriptions>
File name of system data Specifies the system data file name to be loaded.
The extension (.syd) can be omitted.
Important
Do not turn off power to the Vision Sensor until there is a response.
331
FQ2-S/CH User's Manual
Command Control
for Communications Settings