Omron FQ2-S Series User Manual page 381

● Re-register Reference Values (Position Compensation Item): 280F 00104031
This command re-registers the reference value for the specified position compensation item based on the
previously loaded image.
Command Format
MRC SRC Vision Sensor command code
(1 byte) (1 byte) (4 bytes)
28 0F 00104031
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex) Description
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
Position compensation Specifies the item number of the position compensation item that will have its model re-registered. (0 to 7)
item number
FQ2-S/CH User's Manual
for Communications Settings
Position compensation item num-
ber
(4 bytes)
Position compensation item num-
ber 0 to 7 (1 digit max.)
SRES Vision Sensor command code
(1 byte) (4 bytes)
00104031
379
Command Control