Omron FQ2-S Series User Manual page 277

UPDATEREFPOS or URP
Re-register Reference Values (Position Compensation Item)
This command re-registers the reference value for the specified position compensation item based on the
previously loaded image.
<Command Format>
U P D A T E
or
U R P CR
Position compensation
item number (1 digit max.)
Space
(0x20)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Position compensation
item number
FQ2-S/CH User's Manual
for Communications Settings
R E F P O
Delimiter
Specifies the item number of the position compensation item that will have its reference
values re-registered. (0 to 7)
S CR
Delimiter
Position compensation
item number (1 digit max.)
Space
(0x20)
275
Command Control