Omron FQ2-S Series User Manual page 189

Type of command Command
Save commands for PREIMAGESAVEB
binary data files
IMAGESAVEB
PREALLIMAGESAVEB None
ALLIMAGESAVEB
PRECLBSAVEB
CLBSAVEB
PRECGRSAVEB
CGRSAVEB
PREDICSAVEB
DICSAVEB
PREDGRSAVEB
DGRSAVEB
FQ2-S/CH User's Manual
for Communications Settings
Abbreviation Function
None Before images saved to the Sensor's
memory are output in binary data format,
a check is performed to determine if the
data can be received by the external
device that will receive the data.
None Outputs image data stored in the Sensor
memory in binary format.
Before all images saved to the Sensor's
memory are output in binary data format,
a check is performed to determine if the
data can be received by the external
device that will receive the data.
None Outputs all image data stored in the Sen-
sor memory in binary format.
None Before calibration data in binary data for-
mat is output, a check is performed to
determine if the data can be received by
the external device that will receive the
data.
None This command outputs the calibration
data in binary data format.
None Before all calibration data in binary data
format is output, a check is performed to
determine if the data can be received by
the external device that will receive the
data.
None This command outputs the all calibration
data in binary data format.
None Before model dictionary data is output in
binary data format, a check is performed
to determine if the data can be received
by the external device that will receive the
data.
None This command outputs model dictionary
data in binary data format.
None Before all model dictionary data is output
in binary data format, a check is per-
formed to determine if the data can be
received by the external device that will
receive the data.
None This command outputs all model dictio-
nary data in binary data format.
Control and Output in No-Protocol (TCP) / No-Protocol (UDP)
Reference
p.364
p.364
p.365
p.365
p.366
p.366
p.368
p.368
p.369
p.369
p.370
p.370
187