Omron FQ2-S Series User Manual page 231

* The communications protocol types are defined by the following numbers.
Communications Communications type
protocol No.
0 No protocol (Ethernet)
1 No protocol (RS-232C)
2 Parallel I/O
3 Fieldbus
4 Reserved
5 PLC link
Acquire Communication Output Status
This command acquires the output status (allowed/prohibited) for all of the communications protocol set with
the Set Communication Output Status command.
Command (PLC to Vision Sensor)
First word of com-
mand area
12 to 15
+2 0111
+3 0000
Response (Vision Sensor to PLC)
First word of
response area
12 to 15
+2 0111
+3 0000
+4 0000
+5 0000
+6 0000
+7 0000
FQ2-S/CH User's Manual
for Communications Settings
No-protocol (UDP)
No-protocol (TCP)
No-protocol (FINS/TCP)
EtherNet/IP
PROFINET
PLC Link (SYSMAC)
PLC Link (MELSEC)
Bits
8 to 11 4 to 7 0 to 3
0000 0010 0000
0000 0010 0000
Bits
8 to 11 4 to 7 0 to 3
0000 0010 0000
0000 0010 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
Remarks
Results in an error when speci-
fied.
Description
Command code
Description
Command code
The command code for which the response
applies is stored.
Response code
Command execution result
0: OK, FFFFFFFF: NG
Acquired communications protocol status
0: Output prohibited status
1: Output allowed status
229
Command Control