Omron FQ2-S Series User Manual page 218

Hide thumbs Also See for FQ2-S Series:

Table of Contents

Response (Vision Sensor to PLC)

First word of

response area

If you leave the EXE signal ON when you use it to execute the Reset command, the Vision Sensor will restart repeatedly.

After you execute the Reset command, turn OFF the EXE signal before the Vision Sensor restarts.

Get Scene Number

This command aquires the scene number currently being used.

Command (PLC to Vision Sensor)

First word of com-

Response (Vision Sensor to PLC)

First word of

response area

Select Scene

Changes the scene number to be used.

Command (PLC to Vision Sensor)

First word of com-

Command Control

There is no response for a reset operation.

Command code

Command code

The command code for which the response

applies is stored.

Response code

Command execution result

0: OK, FFFFFFFF: NG

Response data

Acquired scene number

Command code

Scene number

FQ2-S/CH User's Manual

for Communications Settings

Show Quick Links

Chapters

Table of Contents

Fq2-ch series