Omron FQ2-S Series User Manual page 266

<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
CLRTOTAL or CTD
Clear Statistical Data
This command clears the statistical data (such as the number of measurements, the number of NG overall
judgments, the NG rate, and other information since the power supply was turned ON) produced by the logging
function held by the Sensor.
<Command Format>
C L R T
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
DATASAVE
Save Settings
This command saves the current system data and all scene data in the Sensor.
<Command Format>
Command
D A T A
264
Command Control
O T A L CR
Delimiter
S A V E CR
Delimiter
or
C T D CR
Delimiter
for Communications Settings
FQ2-S/CH User's Manual