Omron FQ2-S Series User Manual page 153

Note
• The inspection results will be output according to the sorting method that is set for multi-point output for the
inspection item.
• In order to output multiple detection results of the inspection items that can be output their results simultaneously,
from the [Inspection] menu of the targeted inspection item, press [Multi-point output] and select [Yes].
Setting the Output Format
[In/Out] − [I/O setting] − [Output data setting] − [Link data output/Fieldbus data output]
1
Press [Output format].
2
Press [Output form].
3
Set either a floating point decimal or a fixed decimal for the output form.
Item Description
Output form Set the output form for numerical data.
Outputting Character Strings (Only supported on the FQ2-S4/CH)
You can set whether to output the character string that results from reading. Outputting the character string is
possible for the following inspection results.
• OCR
• Bar code
• 2D-code
• 2D-code (DPM)
The procedure for outputting the character string is given here for two inspection items.
[In/Out] − [I/O setting] − [Output data setting] − [Link data output/Fieldbus data output] −
[Output data set]
1
Select the inspection item for which to output the character string.
2
Set the following items on the setting display.
Parameter
String output ON/OFF
Partial output ON/OFF
Output string setup
NG String output on/off
FQ2-S/CH User's Manual
for Communications Settings
Setting
OFF (default)
Yes
No (default)
Yes
1 to 128 for OCR
1 to 1024 for Bar code, 2D-
code, or 2D-code (DPM)
Yes (default)
No
Outputting Data and Controlling Operation through PROFINET
Setting range
Floating point or fixed point (default: Fixed
point)
Description
Sets whether to output the character string that results
from reading.
Sets whether to specify the range of characters to output.
Sets the output range.
Sets whether to output an NG string.
151