Omron FQ2-S Series User Manual page 353

<Execution command format>
Loads all scene data in binary data format.
S G R L O A
<Execution command response format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
File size scheduled to be sent
All scene data (binary)
PRESYSLOADB (Check) / SYSLOADB (Execute)
Loading system data (binary data)
The Sensor loads system data in binary format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 183.
<Confirmation command format>
Before loading system data in binary data format, the Sensor checks whether or not it can receive binary data.
P R E S Y S
FQ2-S/CH User's Manual
for Communications Settings
All scene data (binary)
D B
Space
(0x20)
Number of bytes of all scene data scheduled to send (integer type)
All scene data to be loaded (binary data)
File size scheduled to be sent
L O A D B
Space
(0x20)
CR
Delimiter
CR
Delimiter
351
Command Control