Omron FQ2-S Series User Manual page 371

When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
All calibration data size
All calibration data (binary)
PREDICSAVEB (Check) / DICSAVEB (Execute)
Outputting model dictionary data (binary data)
This command outputs model dictionary data with the specified number in binary data format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 183.
<Confirmation command format>
Before model dictionary data is output in binary data format, a check is performed to determine if the data can
be received by the external device that will receive the data.
P R E D I C
<Confirmation command response format>
When the Command Is Processed Normally
Model dictionary data size
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Execution command format>
This command outputs model dictionary data in binary data format.
D I C S A V
FQ2-S/CH User's Manual
for Communications Settings
Number of bytes of all calibration data to output (integer type)
All calibration data to output (binary data)
Model dictionary data number
S A V E B
Space
(0x20)
CR
Delimiter
E B CR
Delimiter
CR
Delimiter
Command Control
369