Omron FQ2-S Series User Manual page 370

PRECGRSAVEB (Check) / CGRSAVEB (Execute)
Outputting all calibration data (binary data)
This command outputs all calibration data in binary data format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 183.
<Confirmation command format>
Before all calibration data in binary data format is output, a check is performed to determine if the data can be
received by the external device that will receive the data.
P R E C
<Confirmation command response format>
When the Command Is Processed Normally
All calibration data size
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Execution command format>
This command outputs the all calibration data in binary data format.
C G R S
<Execution command response format>
When the Command Is Processed Normally
All calibration data (binary)
O K CR
Delimiter
368
Command Control
G R S A V E
CR
Delimiter
A V E B CR
Delimiter
CR
Delimiter
B CR
Delimiter
FQ2-S/CH User's Manual
for Communications Settings