Gestetner B130 Service Manual page 157

SERVICE PROGRAM
SP6-XXX (Peripherals)
6006* ADF Adjustment (
NOTE: Available menus depend on the machine model and its configuration.
6006 1 StoS/Front Regist
Adjusts the side-to-side registration for the front side of the original, for ADF mode.
Use the
6006 2 Leading Regist
Adjusts the leading edge registration for ADF mode. Use the
"–" before entering the value.
6006 3 Trailing Erase
Adjusts the trailing edge erase margin for ADF mode. Use the
or "–" before entering the value.
6006 5 Sub-scan Magnif
Adjust the sub-scan magnification for the ADF.
6009 ADF Free Run
6009 1 Performs an ADF free run. Press "ON" to start; press "OFF" to stop.
6910* ADF Shading Time
6910 1 Adjusts the interval used for the shading processing in the ADF mode. Light and
heat in the room may affect the scanner response. Reduce this setting if copy
quality indicates that the white level is drifting during ADF copy jobs.
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
3.14)
key to select "+" or "–" before entering the value
[0 ~ 60 / 30 / 1 s/step]
CÓPIA NÃO CONTROLADA
[–1.0 ~ +1.0 / 0.0 / 0.1 mm/step]
[–5.0 ~ +5.0 / 0.0 / 0.1 mm/step]
[–3.0 ~ +3.0 / –1.0 / 0.1 mm/step]
[–0.9 ~ +0.9 / 0.0 / 0.1 %/step]
5-16
key to select "+" or
key to select "+"
SM