Gestetner B130 Service Manual page 36

COPIER
12. Open the front door [A].
NOTE: For B045 model only,
skip to step 18a.
13. Lift lever [B], press in on latch [C]
and pull the bottle holder [D] out.
(You do not need to pull it
completely out of the machine.)
14. Take a new bottle of toner, and
shake it several times.
15. Remove the outer cap [E].
NOTE: DO NOT remove the inner
cap [F].
16. Load the bottle on the holder.
NOTE: DO NOT forcefully turn the
toner bottle on the holder.
After you turn on the main
power switch, the copier sets
the bottle in place.
17. Push the bottle holder back into the
machine.
18. Press the latch [G] down to lock the
holder.
18a. (B045 Model only)
If installing a toner-hopper
magazine (THM) model:
Shake the magazine several
times, then peel off the paper [H]
from a new THM [I], and load the
THM into the machine.
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
[C]
[B]
1-8
CÓPIA NÃO CONTROLADA
[D]
[E]
[G]
[H]
[A]
B046I112.WMF
[F]
B046I301.WMF
[I]
B046I114.WMF
SM