6.23.2 SYSTEM SETTINGS (B044/B045/B046)
The user sets up energy-saving operation using the following User Tool settings.
User Tool – System Setting
Energy Saver timer
Energy Saver level
Auto-Off Timer
AOF
NOTE: If the customer requests that you disable auto-off, please inform the
customer that disabling of this feature will void Energy Star conformance
and is not recommended.
6.23.3 LOW POWER MODE LEVELS (B044/B045/B046)
The Energy Saver Level setting determines which power level is used when the
machine enters Low Power mode.
Mode
Low Power—Level 1
Low Power—Level 2
Low Power—Level 3
6.23.4 AUTO-OFF LEVEL (B044/B045/B046)
Identical to low power mode level 3.
6.23.5 TRANSITION OPERATION (B044/B045/B046)
On entry into low-power or auto-off:
• Main power LED stays ON, operation switch and all other indicators OFF.
• System +5V power remains on.
The machine returns to standby power mode when any of the following "wake-up"
actions occurs:
• Pressing of operation switch
• Opening of platen cover
• Placing sheet in DF
• Wake-up signal from a PC
• Error or SC condition
SM
CÓPIA NÃO CONTROLADA
ENERGY SAVER MODES (B044/B045/B046)
Sets time at which machine moves from standby to the
low-power mode.
• The default is 15 minutes.
Selects the low-power mode that the system uses. The
default is Level 2. (See below.)
Sets time at which machine transitions to auto-off mode.
The default is 30 minutes.
Allows user to disable auto-off. The default setting is on
(enabled). See Note below.
Fusing Temp.
165°C
90°C
Room Temp.
6-67
CÓPIA NÃO CONTROLADA
Operation
Approx. Recovery Time
5 s
10 s
20 s
B129 Series/B044 Series