Gestetner B130 Service Manual page 179

SERVICE PROGRAM
5839* IEEE 1394
5839 4 Host Name
Specifies the host name. Example: RNP0000000000
5839 7* Cycle Master
Enables or disables the cycle master function for the 1394 bus standard.
5839 8* BCR mode
Determines how BCR (Broadcast Channel Register) operates on the 1394 standard
bus when the independent node is in any mode other than IRM. (NVRAM: 2bits)
Always Effective: Writes from the IRM.
Standard:
IRM Color Copy:
5839 9* IRM 1394a Check
Conducts a 1394a check of IRM when the independent node is in any mode other
than IRM.
OFF: Checks whether IRM conforms to 1394a.
ON: After IRM is checked, if IRM does not conform then independent node
switches to IRM.
5839 10* Unique ID
Lists the ID (Node_Unique_ID) assigned to the device by the system administrator.
OFF: Does not list the Node_Unique_ID assigned by the system administrator.
Instead, the Source_ID of the GASP header in the ARP is used.
ON: The Node_Unique_ID assigned by the system administrator is used, and the
Source_ID of the GASP header in the ARP is ignored. Also, when the serial
bus is reset, extra bus transactions are opened for enumeration.
5839 11* Logout
Handles the login request of the login initiator for SBP-2. (1bit)
OFF: Disable (refuse login). Initiator retry during login. Login refusal on arrival of
login request (standard operation)
ON: Enable (force logout). Initiator retry during login. Login refusal on arrival of
login request, and the initiator forces the login.
5839 12* Login
Enables or disables the exclusive login feature (SBP-2 related).
OFF: Disables. The exclusive login (LOGIN ORB exClusvie it) is ignored.
ON: Enables. Exclusive login is in effect.
5839 13* Login MAX
Sets the maximum number of logins from the initiator (6-bits)
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
Enter name
OFF / ON
Copies BCR of the IRM after no data is written from the IRM
after the prescribed time has elapsed.
BCR normally enabled.
[0~63 / 8 / 1/step], (0 and 63: Reserved)
5-38
CÓPIA NÃO CONTROLADA
SM