Service Tables; Service Program Mode; Activating And Quitting Sp Mode; Activating Printer/Scanner Sp Mode - Gestetner B130 Service Manual

3. SERVICE TABLES

3.1 SERVICE PROGRAM MODE


CAUTION
Before activating the service program mode, check that the Data-In LED is
off. The LED indicates that the machine is processing some data.

CAUTION
Do not turn off the main power switch while the Power LED is on or
blinking; otherwise, the memory may be damaged. Before turning off the
main power switch, press the power key on the operation panel and wait
until the Power LED turns off.
NOTE: The main power LED is on or blinks under any of the following conditions:
• The platen cover is open.
• The copier is communicating with a network device.
• The copier is accessing the memory.

3.1.1 ACTIVATING AND QUITTING SP MODE


IMPORTANT
Do not let the user have an access to the service program mode (SP mode).
Only service representatives are allowed to use the SP mode. Should the
user have an access to the SP mode, the normal operation of the machine
is NOT guaranteed any more.

Activating Printer/Scanner SP Mode

1. Press the  key.
2. Press the following keys in the following order: 
3. Press the  key and hold it down until the SP mode menus are displayed (for
about three seconds).
4. Press the  key (Printer SP) or the  key (Scanner SP).

Quitting Printer/Scanner SP Mode

Press the  (cancel) key several times until you quit the printer/scanner SP mode.
SM
CÓPIA NÃO CONTROLADA
3
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
B683