Gestetner B130 Service Manual page 233

SERVICE PROGRAM
NVRAM Download (SP5-825-001)
SP5-825-001 copies the data from a flash memory card to the NVRAM. Most of the
data in the NVRAM is overwritten. The following data in the NVRAM remains
unchanged (these are not overwritten):
• SP8-221-001 (ADF Original Feed > Front)
• SP8-381-001 (Total: Total Printer Pages)
• SP8-382-001 (Copy Application: Total Print Pages)
• SP8-411-001 (Prints/Duplex)
1. Turn off the main power switch.
2. Remove the memory card cover [B] (
1).
3. Turn the face of the flash memory card
[A] ("A" is printed on it) to the rear of the
copier, and insert it into the card slot [C].
4. Turn on the main switch.
5. Activate the SP mode and select SP5-
825-001.
6. The copier overwrites the data in the
NVRAM with the data in the memory card.
This takes about one second. If
downloading fails, an error message
appears. If an error message appears,
retry the download procedure.
7. Turn off the main power switch.
8. Remove the memory card.
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
x
5-92
CÓPIA NÃO CONTROLADA
[C]
[B]
[A]
B130S901.WMF
SM