Service Tables And Procedures; Accessing Ifax Switch; Ifax Switch - Gestetner B130 Service Manual

3. SERVICE TABLES AND PROCEDURES

3.1 ACCESSING IFAX SWITCH


IMPORTANT
Do not let the user have an access to the service program mode (SP mode).
Only service representatives are allowed to use the SP mode. Should the
user have an access to the SP mode, the normal operation of the machine
is NOT guaranteed any more.
1. Press the  key.
2. Press the following keys in the following order: 
3. Press the  key and hold it down until the SP mode menu is displayed (for
about 3 seconds).
4. Press the  key.
5. Select an IFAX switch (SP1-102-001 ~16).

3.2 IFAX SWITCH


CAUTION
Do not change the settings marked with the key "Not used," "DFU," or
"Japan Only." Changing these settings may cause malfunctions and/or
may violate local regulations.
NOTE: For the default settings of the bit switches, see the System Parameter List
(! SP6-101-001).
SP IFAX SW 00 - Not used (Do not change the settings.)
SM
CÓPIA NÃO CONTROLADA
9
CÓPIA NÃO CONTROLADA
ACCESSING IFAX SWITCH
IFAX