Postscript 3 - Gestetner B130 Service Manual

POSTSCRIPT 3

1.7 POSTSCRIPT 3
1. Remove the memory card cover [A]
( x 1).
2. Remove the rear cover [B] (
3. Remove the upper left cover [C] if
the fax control unit is installed.
4. Remove the controller box cover
[D]
( x 12).
5. Remove the fax control unit (if
installed) [E] (
6. Install the PostScript 3 emulation board [F].
7. Reassemble the copier.
8. Plug in the power cord, and turn on the main
switch.
9. Verify unit operation.
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
x 5).
x 1, x 3).
CÓPIA NÃO CONTROLADA
[B]
[D]
1-34
[C]
[A]
B696I902.WMF
[E]
B683I904.WMF
[F]
B683I905.WMF
SM