Ifax Switches; Printer Switches - Gestetner B130 Service Manual

3.2.2 IFAX SWITCHES

See the IFAX Service Manual.

3.2.3 PRINTER SWITCHES

Printer Switch 00
No FUNCTION
0 Page separation mark
0: Disabled
1: Enabled
1 Repetition of data when the
received page is longer than
the printer paper
0: Disabled
1: Enabled
2 Prints the date and time on
received fax messages
0: Disabled
1: Enabled
3-7 Not used
Printer Switch 01 - Not used (Do not change the settings.)
The table lists the paper sizes and print widths used in the setup protocol.
Available Paper Size
A4 or 8.5" x 11"
B5
A5 or 8.5" x 5.5"
No paper available (Paper end)
SM
CÓPIA NÃO CONTROLADA
0: No marks are printed.
1: If a received page has to be printed out on two
sheets, an asterisk inside square brackets is printed
at the bottom right hand corner of the first sheet,
and a "2" inside a small box is printed at the top right
hand corner of the second sheet. This helps the
user to identify pages that have been split.
0: The next page continues from where the previous
page left off.
1: The final few mm of the previous page are
repeated at the top of the next page. The amount of
repeated data depends on printer switch 04, bits 5
and 6.
This switch is only effective when user parameter 02
- bit 2 (printing the received date and time on
received fax messages) is enabled.
1: The machine prints the received and printed date
and time at the bottom of each received page.
Do not change the settings.
Print width used in the Protocol (NSF/DIS)
29
CÓPIA NÃO CONTROLADA
BIT SWITCHES
SP No. 1-103-001
COMMENTS
297 mm width
256 mm width
216 mm width
216 mm width
Fax Unit