Gestetner B130 Service Manual page 164

Fusing Temperature Adjustment
1105*
Adjusts the target fusing temperature. Note that the thermistor is at the center of the
hot roller.
1105 1 Warm Up-Center
1105 3 Standby-Center
1105 5 Copying-Center
1105 7 Low Level 2-Center
1105 9 Thick-Center
1106 Display Fusing
1106 1 Center
1107* Fusing Soft Start DFU
Adjusts the number of zero-cross cycles of the fusing lamp AC supply needed to
bring the fusing lamp power to 100% while bringing the lamp up to the standby
temperature or while copying. Increase this value if the machine is experiencing
sudden power dropouts.
1107 1 Warm Up Soft Start
1107 2 Other Soft Start
1107 3 Soft Stop Setting
Set-Fusing Start
1108*
1108 1 Specifies the interval for fusing-temperature control.
1109 Nip Band Check
1109 1 Conducts the nip band check (
Fan Control Timer
1110*
1110 1 Specifies the fan control time. The fan motor keeps its operating speed for the
specified time before changing the speed or stopping. The fan control timer
prevents the exhaust fan from suddenly stopping. This function protects the copier
from overheating.
1902 Display-AC Freq.
1902 1 Displays the fusing lamp power control frequency (as detected by the zero cross
signal generator). The displayed value is 1/5 the actual frequency: 10 and lower =
50 Hz, 12 and lower = 60 Hz.
1911* By-pass Envelope
1911 1 The program dedicated to envelope printing runs when you enable this program
(SP1-911-001) and you select "Thick Paper" as the paper type of the by-pass tray
( > System Settings > Tray Paper Settings > Paper Type: Bypass Tray).
SM
CÓPIA NÃO CONTROLADA
[140 ~ 180 / 160 / 1°C/step]
[140 ~ 160 / 150 / 1°C/step]
[140 ~ 180 / 160 / 1°C/step]
[0 ~ 80 / 60 / 1°C/step]
[140 ~ 185 / 165 / 1°C/step]
Displays the fusing temperature.
[0 = 10 cycles / 1 = 20 cycles / 2 = 50 cycles]
[0 = 10 cycles / 1 = 20 cycles / 2 = 50 cycles / 3 = 1 cycle]
[0: No / 1: Yes]
[0 = 1s / 1 = 1.5s / 2 = 2s]
3.5.7).
[30 ~ 60 / 30 / 1 s/step]
[0 = Disabled / 1= Enabled]
5-23
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM
B129 Series/B044 Series