Gestetner B130 Service Manual page 61

21. For North America model only:
Attach the FCC decal [A] to the rear side
of the copier.
22. Reassemble the whole copier.
23. Attach the ferrite core [B] to the
network cable and attach the cable to
the copier if a network cable is used.
The end of the ferrite core must be
about 15 cm (6") from the end of the
cable [C].
24. Plug in the power cord, and turn on
the main switch.
25. Verify unit operation.
SM
CÓPIA NÃO CONTROLADA
[A]
1-33
CÓPIA NÃO CONTROLADA
PRINTER SCANNER UNIT B683
[B]
[C]
B622I903.WMF
B129 Series/B044 Series
B683I917.WMF
B441I108.WMF