Starting Point - Gestetner B130 Service Manual

IEEE 802.11B (WIRELESS LAN)

Starting Point

If you see some problem, examine the following:
• Wireless-LAN-card LED: The LED indicates that the interface board is operating
normally. This does not necessarily means that all wireless-LAN settings are
correct.
• Network settings: Check that IEEE 802.11b is set as the LAN type.
• Channel settings: Check that the correct channel is selected.
• Security settings: Check that the correct SSID and the WEP key are selected.
If you see some problem with the infrastructure mode, examine the following:
• MAC address: Check that the MAC address is correctly set.
• Communication condition: If the condition of communication is poor, try moving
the machine. Remove any obstacle that may interfere with radio communication.
Try changing the communication channel.
B683
CÓPIA NÃO CONTROLADA
18
CÓPIA NÃO CONTROLADA
SM