Gestetner B130 Service Manual page 52

DOCUMENT FEEDER (B696 AND B444)
4. Place the ADF original table [A]
on the platen cover.
5. Insert the three latches into the
openings.
NOTE: The latches may break
if you try to push the
table in at an angle.
6. Make sure that that the contact
area [B] around each latch is
flush against the cover.
7. (B129/B130/B168/B169 Only) Remove
the memory card cover [C] (
8. Remove the rear cover [D] (
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
x 1)
x 5).
[D]
1-24
CÓPIA NÃO CONTROLADA
[A]
[B]
[C]
B696I909.WMF
B696I902.WMF
SM