Gestetner B130 Service Manual page 176

5508* CC Call
5508 1* Jam Remains
Enables/disables initiating a call for an unattended paper jam.
5508 2* Continuous Jams
Enables/disables initiating a call for consecutive paper jams.
5508 3* Continuous Door Open
Enables/disables initiating a call when the front door remains open.
5508 4* Low Call Mode
Enables/disables the new call specifications designed to reduce the number of
calls.
5508 11* Jam Detection: Time Length
Sets the time a jam must remain before it becomes an "unattended paper jam".
This setting is enabled only when SP5508 004 is set to 1.
5508 12* Jam Detection: Continuous Count
Sets the number of consecutive paper jams required to initiate a call. This setting
is enabled only when SP5508 004 is set to 1.
5508 13* Door Open: Time Length
Sets the length of time the door remains open before the machine initiates a call.
This setting is enabled only when SP5508 004 is set to 1.
5508 21 CC Call: Long Time Jam
Selects the machine reaction to long time jams.
5508 22 CC Call: Continuous Jam
Selects the machine reaction to continuous jams.
5508 23 CC Call: Door Open
Selects the machine reaction to door open.
5801 Memory Clear
5801 1 All Clear
5801 3 SCS
5801 4 IMH Memory Clear
5801 5 MCS
5801 6 Copier application
5801 7 Fax application
5801 8 Printer application
5801 9 Scanner application
5801 10 Web service/Network
application
5801 11 NCS
5801 12 R-Fax
5801 14 Clear DCS Settings
5801 15 Clear UCS Settings
SM
CÓPIA NÃO CONTROLADA
[0: Disable, 1: Enable]
[0: Disable, 1: Enable]
[0: Disable, 1: Enable]
[0: Normal mode, 1: Reduced mode]
[03~30 / 10 / 1/step]
[02~10 / 5 / 1/step]
[03~30 / 10 / 1/step]
[0 = Auto call / 1 = Alarm]
[0 = Auto call / 1 = Alarm]
[0 = Auto call / 1 = Alarm]
Executes the following memory clears at the
same time: SP5-801-2 through 12.
Initializes the system-control-service settings.
Initializes the image-memory-handler settings.
Initializes the memory-control-service settings.
Initializes the copier-application settings.
Initializes the fax-application settings.
Initializes the printer-application settings.
Initializes the scanner-application settings.
Deletes the network file application management
files and thumbnails, and initializes the job login
ID.
Initializes the network-control-service settings:
the system defaults and interface settings
(including IP addresses), Smart Net Monitor for
Administrator, Web Status Monitor settings, and
the TELNET settings.
Initializes the job log in ID, Smart Net Monitor for
Administrator, job history, and local storage file
numbers.
5-35
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM
B129 Series/B044 Series