Gestetner B130 Service Manual page 615

BIT SWITCHES
Communication Switch 03
No. FUNCTION
0–7 Maximum number of page
retransmissions in a memory
transmission
Communication Switch 04 - Not used (do not change any of these settings)
Communication Switch 05 - Not used (do not change any of these settings)
Communication Switch 06
No. FUNCTION
0–5 Not used
6 Dialing requirements: USA
0: Disabled 1: Enabled
7 DTS requirements: Germany
0: Disabled 1: Enabled
Communication Switch 07 - Not used (do not change any of these settings)
Communication Switch 08 - Not used (do not change any of these settings)
Communication Switch 09 - Not used (do not change any of these settings)
Communication Switch 0A
No. FUNCTION
0 Point of resumption of
memory transmission upon
redialing
0: From the error page
1: From page 1
1–6 Not used
7 Emergency calls using 999
0: Enabled 1: Disabled
Communication Switch 0B - Not used (do not change any of these settings)
Communication Switch 0C - Not used (do not change any of these settings)
B465
CÓPIA NÃO CONTROLADA
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
Do not change these settings.
This function automatically sets these switches to
the required settings for each country after
selecting a country code (System switch 0F).
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using
normal memory transmission.
Do not change these settings.
Hong Kong only
If this bit is at 1, the machine will not allow you to
dial 999 at the auto-dialer.
5-22
CÓPIA NÃO CONTROLADA
COMMENTS
COMMENTS
COMMENTS
SM