Gestetner B130 Service Manual page 605

BIT SWITCHES
System Switch 0A
No.
0–2 Not used
3 Continuous polling reception
0: Disabled 1: Enabled
4 Dialing on the ten-key pad when
the handset is off-hook
0: Disabled 1: Enabled
5 On-hook dial
0: Disabled 1: Enabled
6, 7 Not used
System Switch 0B
No.
0, 1 Automatic reset timer
Bit 1 0 Timer setting
0 0 30 seconds
0 1 1 minutes
1 0 3 minutes
1 1 5 minutes
2–7 Not used
System Switch 0C
No.
0–2 Not used
3 Paper size selection for ADF mode
0: A4 1: Letter
4–7 Not used
System Switch 0D
No.
0–2 Not used
3 Paper size selection for book scan
mode
0: A4 1: Letter
4–7 Not used
System Switch 0E - Not used (do not change any of these settings)
B465
CÓPIA NÃO CONTROLADA
FUNCTION
FUNCTION
FUNCTION
FUNCTION
5-12
CÓPIA NÃO CONTROLADA
COMMENTS
Do not change these settings
This feature allows a series of stations to be
polled in a continuous cycle.
1: The user can dial on the ten-key pad when
the handset is off-hook.
0: On-hook dial is disabled.
Do not change these settings
COMMENTS
The machine returns to standby mode when
the timer expires after the last operation.
Do not change these settings.
COMMENTS
Do not change these settings.
This switch determines the original size in
ADF mode, and fixes the maximum scanning
width.
Do not change these settings.
COMMENTS
Do not change these settings.
This switch determines the original size in
book scan mode, and fixes the maximum
scanning width.
Do not change these settings.
SM