Error Codes - Gestetner B130 Service Manual

2. TROUBLESHOOTING

2.1 ERROR CODES

The following table lists the controller error codes. If an error occurs, SC2001 and
one of the following codes are displayed together at power-on, or after the power-
on self-test.
Please refer to section 3.4 for details of the Power-On Self-Test.
Code Description
00xx Exceptional operation error
0101 Code ROM error
0201 Resident RAM error
0301 Optional RAM error
06xx CPU error
Engine interface and video data
0Fxx
error
11xx Centronics parallel interface error
1401 NVRAM error
1601 Font ROM error
1Bxx NIB interface error
1Cxx Parallel interface error
25xx PS2 error
SM
CÓPIA NÃO CONTROLADA
• Replace the controller if the error is
frequent.
• Replace the controller if the error is
frequent.
• Replace the controller if the error is
frequent.
• Replace the optional DIMM if the error is
frequent.
• Replace the controller if the error is
frequent.
• Check the connection between the engine
board and the controller
• Replace the controller if the error is
frequent.
• Replace the NVRAM if the error is
frequent.
• Replace the controller if the error is
frequent.
• Replace the controller if the error is
frequent.
• Replace the controller if the error is
frequent.
• Replace the PS DIMM if the error is
frequent.
2-1
CÓPIA NÃO CONTROLADA
ERROR CODES
Required Action
B441