Collation (Sorting); Auto Continue; Page Protect - Gestetner B130 Service Manual

CONTROLLER FUNCTIONS

4.2.2 COLLATION (SORTING)

This feature is available when the driver specifies it. Is not executed by the driver
but by memory board on the controller.

4.2.3 AUTO CONTINUE

When this function is enabled, the machine continues printing automatically (after
10 seconds) even if one of the following errors occurs. However, the page where
the error occurred may not be printed out correctly.
• Print Overrun
• Memory Overflow
• Memory Full
If Auto Continue is disabled and the one of the above errors occurs, the machine
will stop printing and will display an error message on the operation panel.
NOTE: The default setting for Auto Continue is "Disabled."

4.2.4 PAGE PROTECT

When a Print Overrun error occurs and this function is set to "Auto", this error can
be avoided by changing the setting to "On". However, printing may slow down.
NOTE: The default setting for Page Protect is "Auto".
B441
CÓPIA NÃO CONTROLADA
4-4
CÓPIA NÃO CONTROLADA
SM