Gestetner B130 Service Manual page 608

System Switch 17
No. FUNCTION
0–2 Not used
3 Tonal signals key when the
machine is in pulse dial setting.
0: Disabled 1: Enabled
4, 5 Not used
6 Notify user when the
communication is complete
0: Not notify 1: Notify
7 Not used
System Switch 18 - Not used (do not change any of these settings)
System Switch 19 - Not used (do not change any of these settings)
System Switch 1A - Not used (do not change any of these settings)
System Switch 1B - Not used (do not change any of these settings)
System Switch 1C - Not used (do not change any of these settings)
System Switch 1D - Not used (do not change any of these settings)
System Switch 1E - Not used (do not change any of these settings)
System Switch 1F - Not used (do not change any of these settings)
SM
CÓPIA NÃO CONTROLADA
Do not change these settings.
1: The machine can dial out tone signals.
Do not change these settings.
1: The machine notifies the user with a beeper
when the communication is complete.
Do not change the setting.
5-15
CÓPIA NÃO CONTROLADA
BIT SWITCHES
COMMENTS
B465