Gestetner B130 Service Manual page 168

Vref Limits
2929*
2929 1 Upper
2929 2 Lower
2994* ID Sensor Detection Temperature
2994 1 Adjusts the temperature threshold. The ID sensor signal is not referenced when the
fusing temperature is at the specified level or higher while the copier is recovering
or starting up.
2996* Transfer Roller Cleaning
2996 1 Cleans or does not clean the transfer roller before each job. Select "1" if the rear
side of the paper becomes dirty when output. Note that the copier takes a longer
time to output the first copy when you select "1". If you select "0," the transfer roller
is never cleaned.
2998* Main Scan Magnification
2998 1 Adjusts the magnification (
SM
CÓPIA NÃO CONTROLADA
Adjust the upper or lower Vref limit.
[0.50 ~ 3.50 / 3.20 / 0.01V/step] DFU
[0.50 ~ 3.50 / 0.70 / 0.01V/step] DFU
[30 ~ 90 / 30 / 1 °C/step]
[0 = No / 1 = Yes]
[–0.5 ~ +0.5 / 0.0 / 0.1%/step]
3.14). The specification is 100 ± 1.0%.
5-27
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM
B129 Series/B044 Series