Gestetner B130 Service Manual page 249

FIRMWARE UPDATE PROCEDURE (B130/B168/B169)
7. Use the up and down scroll
keys to scroll to the firmware
you wish to install.
• If you wish to install the
following firmware
simultaneously, press the
START key. The scroll keys
can be used to confirm that the
firmware has been selected (highlighted with a dark background).
• BICU, MBU(FCU), ScannerSDCard, PrinterSDCard, Printer FontSDCard.
• Please note that the following firmware cannot be updated simultaneously. The
update procedure must be repeated for each, individually.
• System/Copy, Network DocBox, Network Support, Fax, Web Support.
8. Press the OK key.
• "Verify", "Update" and "Exit" will be displayed at the bottom of the LCD, and the
firmware to be updated will be highlighted (dark background).
NOTE: Do NOT press the
"Verify" key.
• To return to the menu, press
the key. To select the
module, press the OK key. To
quit the firmware-update
program, press the F3 key. To
select all modules, press the
key. To cancel the
selection, press the
To scroll through the module
name, the serial number, and
the version, press the
or key.
9. Press the "UpDate" key.
• The update will begin, which
will take a few minutes to
complete. The LCD will
initially display,
"Updating... ***---------".
• When the update is
completed, the LCD display
will change to "Update done"
or "Updated / Power Off On"
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
key.
key
5-108
CÓPIA NÃO CONTROLADA
SM