Initial Programming - Gestetner B130 Service Manual

1.1.3 INITIAL PROGRAMMING

Items to Program (Service Level – Service Functions
Country code (System switch 0F)
Protocol requirements (G3 switch 0B) - EU only
PM call (System switch 01 – bit 0)
Country code (NCU parameter 00)
Service station's fax number
Items to Program (Service Level – SP Mode
Machine's serial number
Language replacement (Firmware download)
PSTN access code (RAM address 4000DB)
PSTN access method (RAM address 4000CD)
Periodic service call (RAM addresses 40054F to 400553)
*1: See Section 5.1.1 for information about how to enter service functions.
Items to Program (User Administrator Level)
Monitor volume
Display contrast
Date and Time
Reception mode
Fax Header/Own Name/Own No. (TTI/RTI/CSI)
Reports on/off
Country Code (except NA)
Energy saver level
Language selection
Other initial programming items
*2: Refer to the Operating Instructions for details.
SM
CÓPIA NÃO CONTROLADA
*1
1-9
CÓPIA NÃO CONTROLADA
*1
) Function No.
01
01
01
07
09
) SP No.
5-811
5-827
7-955
User Tools
Fax Features ->
Setup
Key Op. Tools
System Settings
Language
*2
FAX UNIT
B465