Sd Card Preparation - Gestetner B130 Service Manual

5.2.2 SD CARD PREPARATION

NOTE: Format a pure SD card with, for example, SD Formatter v1.1. . You can
download this application program from the following Web site:
http://panasonic.co.jp/pavc/global/cs/sd/index.html
1. You do not have to initialize your SD card as long as the format of the SD card
is not corrupted. Your SD card is already formatted when you get it from Ricoh
Family Group. Refer to important note above to reformat the card if necessary.
2. Create a "romdata" folder on the card.
3. Create the following folders within the "romdata" folder: B129, B130, B681,
B683
4. Download the firmware from the server and store the files in the folder with the
corresponding model code on the SD card. Example: File B1295540B should
be stored in the "B129" folder, whereas files B6835902B, B6835903B, and
B6535905B should be stored in the "B683" folder.
NOTE: It is strongly recommended to store only B129 (with MFP option) B130,
B168 files or B129 (with MFP option), B130, B168 and B121/B122/B123
MFP files on SD cards used for downloading to the B129/B130/B168. With
the controller used on this model, firmware update may sometimes be
interrupted if there is firmware for multiple models except B121/B122/B123
stored on the same SD card.
SM
CÓPIA NÃO CONTROLADA
FIRMWARE UPDATE PROCEDURE (B130/B168/B169)
5-105
CÓPIA NÃO CONTROLADA
B129 Series/B044 Series